Getting started
04
5
Select the Auto Channel Setting ('Auto Scan' or
'Download from TV'), or 'Do not set', then press
ENTER.
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
• Select Do not set if you want to skip setting up the
channels (because they have already been set up, for
example).
• You can only use the Download from TV feature if
you connected this recorder to your TV using a
fully-wired 21-pin SCART cable connected to the
AV1(RGB)-TV connector, and if your TV supports this
function (check your TV's instruction manual for
more details).
•
Use the
choose your country, then press ENTER.
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
•
Auto-tuning channels
The Auto Scan option automatically scans and sets the
channel presets.
•
Downloading channels from your TV
Use the Download from TV option to download all the
channels that your TV is tuned to.
26
En
Auto Channel Setting
Clock Set
Input Line System
On Screen Display
Auto Scan
Front Panel Display
Power Save
Download from TV
Remote Control Set
Do not set
Setup Navigator
Setup Navigator
(cursor left/right) buttons to
Country Selection
Clock Set
Input Line System
Country
Austria
On Screen Display
Front Panel Display
Power Save
Remote Control Set
Setup Navigator
Setup Navigator
Tuning
32/213
Cancel
Downloading
Pr 5
Cancel
6
Select 'Auto' for automatic time setting, or
'Manual' to set the clock manually, then press
ENTER.
Initial Setup
Basic
Clock Set
Clock Setting
Tuner
Input Line System
Video In/Out
On Screen Display
Audio In
Front Panel Display
Audio Out
Power Save
Language
Remote Control Set
Recording
Setup Navigator
Setup Navigator
Playback
•
Auto clock setting
Some TV channels broadcast time signals together
with the program. This recorder can use these
signals to set the clock automatically.
Set 'Clock Set CH' to the channel preset number
that broadcasts a clock signal, then move the
cursor down to 'Start' and press ENTER.
Initial Setup
Auto Clock Setting
Basic
Clock Set
Tuner
Input Line System
Date
Video In/Out
On Screen Display
Time
Audio In
Front Panel Display
Audio Out
Power Save
Clock Set CH
Language
Remote Control Set
Recording
Setup Navigator
Setup Navigator
Playback
The recorder takes a short while to set the time. After
you see that the time has been set, select Next to
proceed.
Initial Setup
Auto Clock Setting
Basic
Clock Set
Tuner
Input Line System
Date
Video In/Out
On Screen Display
Time
Audio In
Front Panel Display
Audio Out
Power Save
Clock Set CH
Language
Remote Control Set
Recording
Setup Navigator
Setup Navigator
Playback
If the time could not be set automatically, press
RETURN to go back to the previous screen and select
Manual.
•
Manual clock setting
If no stations in your area are broadcasting time
signals, you can set the clock manually.
Auto
Manual
Pr 1
Start
WED
01
01
2003
11
20
Pr 1
Start
Next