Using Other Types Of Audio/Video Output - Pioneer DVR-3100 Operating Instructions Manual

Connecting up

Using other types of audio/video output

If you can't use the SCART AV connector to connect your TV to this recorder, there are standard audio/video output
jacks, as well as an S-video output.
Using the supplied audio/video cable
AUDIO
INPUT
VIDEO
INPUT
TV
2
AV 2/INPUT 1
IN
INPUT 1/
AUTO REC OUTPUT
R L R L
OUT
AUDIO VIDEO S-VIDEO AUDIO VIDEO
VHF/UHF
1 Connect the VIDEO OUTPUT jack to a video input
on your TV.
Use the yellow jack of the supplied audio/video cable for
the video connection.
2 Connect the AUDIO OUTPUT jacks to the
corresponding audio inputs on your TV.
Use the red and white jacks of the supplied audio/video
cable for the audio connection. Make sure you match up
the left and right outputs with their corresponding inputs
for correct stereo sound.
1
AV 1(RGB)-TV
DIGITAL AC IN
CONTROL
OUT
S-VIDEO
OPTICAL IN
Using the S-video output
AUDIO
INPUT
2
TV
AV 2/INPUT 1
IN
INPUT 1/
AUTO REC OUTPUT
R L R L
OUT
AUDIO VIDEO S-VIDEO AUDIO VIDEO S-VIDEO
VHF/UHF
1 Use an S-video cable (not supplied) to connect
the S-VIDEO OUTPUT to an S-video input on your TV,
monitor (or other equipment).
2 Connect the AUDIO OUTPUT jacks to the
corresponding audio inputs on your TV.
You can use the supplied audio/video cable, leaving the
yellow video plug disconnected. Make sure you match up
the left and right outputs with their corresponding inputs
for correct stereo sound.
S-VIDEO
INPUT
1
AV 1(RGB)-TV
DIGITAL
CONTROL AC IN
OUT
OPTICAL IN
02
15
En