Specifications; General Safety Rules - Makita HR2470 Instruction Manual

ENGLISH
1 Switch trigger
2 Lock button
3 Lamp
4 Reversing switch lever
5 Quick change chuck for SDS-
plus
6 Change cover line
7 Change cover
8 Spindle
9 Quick change drill chuck
10 Change cover

SPECIFICATIONS

Model
Capacities
Concrete
Tungsten-carbide tipped bit ..................................... 24 mm
Core bit .................................................................... 54 mm
Diamond core bit (dry type) ..................................... 65 mm
Steel ........................................................................... 13 mm
Wood .......................................................................... 32 mm
–1
No load speed (min )................................................... 0 – 1,100
Blows per minute........................................................... 0 – 4,500
Overall length ................................................................ 370 mm
Net weight ..................................................................... 2.6 kg
Safety class ...................................................................
• Due to our continuing programme of research and
development, the specifications herein are subject to
change without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.

GENERAL SAFETY RULES

WARNING! Read all instructions. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury. The term "power tool" in all of the
warnings listed below refers to your mains-operated
(corded) power tool or battery-operated (cordless) power
tool.
SAVE THESE INSTRUCTIONS.
Work area safety
1. Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
6
Explanation of general view
11 Action mode changing knob
12 Rotation only
13 Hammering only
14 Grip base
15 Side grip
16 Loosen
17 Tighten
18 Teeth
19 Protrusion
20 Bit shank
21 Bit grease
HR2470/HR2470F
/II
3.
Electrical safety
4.
5.
6.
7.
GEA001-3
8.
Personal safety
9.
22 Bit
23 Chuck cover
24 Depth gauge
25 Dust cup
26 Blow-out bulb
27 Chuck adapter
28 Keyless drill chuck
29 Sleeve
30 Ring
HR2470T/HR2470FT
24 mm
54 mm
65 mm
13 mm
32 mm
0 – 1,100
0 – 4,500
394 mm
2.8 kg
/II
Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.