Makita HR2470 Instruction Manual
Rotary hammer
Hide thumbs
Also See for HR2470:
- Instruction manual (64 pages) ,
- Technical information (20 pages) ,
- Instruction manual (13 pages)
Related Manuals for Makita HR2470
Summary of Contents for Makita HR2470
- Page 1 INSTRUCTION MANUAL Rotary Hammer HR2470 HR2470F HR2470FT HR2470T 007943 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model HR2470/HR2470F HR2470T/HR2470FT Tungsten-carbide tipped bit 24 mm Concrete Core bit 54 mm Capacities Diamond core bit (dry type) 65 mm Steel 13 mm Wood 32 mm No load speed (min 0 - 1,100 Blows per minute... - Page 3 Designation of Machine: adapter plugs with earthed (grounded) power Rotary Hammer tools. Unmodified plugs and matching outlets will Model No./ Type: HR2470, HR2470F, HR2470FT, reduce risk of electric shock. HR2470T Avoid body contact with earthed or grounded are of series production and...
- Page 4 13. Remove any adjusting key or wrench before parts. This will ensure that the safety of the power turning the power tool on. A wrench or a key left tool is maintained. attached to a rotating part of the power tool may 25.
-
Page 5: Functional Description
supplier safety data. CAUTION: Do not look in the light or see the source of light • SAVE THESE INSTRUCTIONS. directly. To turn on the lamp, pull the trigger. Release the trigger WARNING: to turn it off. DO NOT let comfort or familiarity with product NOTE: (gained from repeated use) replace strict adherence to safety rules for the subject product. -
Page 6: Torque Limiter
For drilling in wood, metal or plastic materials, depress CAUTION: the lock button and rotate the action mode changing Before removing the quick change chuck for • knob to the symbol. Use a twist drill bit or wood bit. SDS-plus, always remove the bit. Hammering only Grasp the change cover of the quick change chuck for SDS-plus and turn in the direction of the arrow until the... - Page 7 Side grip (auxiliary handle) To remove the bit, pull the chuck cover down all the way and pull the bit out. 1. Grip base 2. Side grip 1. Bit 3. Loosen 2. Chuck cover 4. Tighten 5. Teeth 6. Protrusion 007949 007939 CAUTION:...
- Page 8 The depth gauge is convenient for drilling holes of and normal drilling may be resumed. uniform depth. Loosen the side grip and insert the depth CAUTION: gauge into the hole in the side grip. Adjust the depth gauge to the desired depth and tighten the side grip. There is a tremendous and sudden twisting force •...
- Page 9 "Installing or removing the bit" described on the maintenance or adjustment should be performed by previous page. Makita Authorized Service Centers, always using Makita For model HR2470T/HR2470FT replacement parts. Use the quick change drill chuck as standard equipment.
- Page 10 Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. SDS-Plus Carbide-tipped bits • Bull point • Cold chisel •...
- Page 12 Makita Corporation Anjo, Aichi, Japan 884704C226...