Maintenance; Ec Declaration Of Conformity - Makita HR2470 Instruction Manual

Diamond core drilling
When performing diamond core drilling operations,
always set the change lever to the m position to use "rota-
tion only" action.
CAUTION:
• If performing diamond core drilling operations using
"rotation with hammering" action, the diamond core bit
may be damaged.

MAINTENANCE

CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspection or
maintenance.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized Service Centers, always using Makita
replacement parts.
ACCESSORIES
CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• SDS-Plus Carbide-tipped bits
• Bull point
• Cold chisel
• Scaling chisel
• Grooving chisel
• Drill chuck assembly
• Drill chuck S13
• Chuck adapter
• Chuck key S13
• Bit grease
• Side grip
• Depth gauge
• Blow-out bulb
• Dust cup
• Dust extractor attachment
• Safety goggles
• Plastic carrying case
• Keyless drill chuck
10
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-6:
Sound pressure level (L
Sound pressure level (L
Uncertainty (K): 3 dB (A)
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-6:
Work mode: chiseling function
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: hammer drilling into concrete, 10 mm diam-
eter and 100 mm depth
Vibration emission (a
Uncertainty (K): 1.5 m/s
EC-DECLARATION OF CONFORMITY
Model; HR2470, HR2470F, HR2470FT, HR2470T
We declare under our sole responsibility that this product
is in compliance with the following standards of
standardized documents;
EN60745, EN55014, EN61000
in accordance with Council Directives, 2004/108/EC and
98/37/EC.
Tomoyasu Kato
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
): 90 dB (A)
pA
): 101 dB (A)
wA
2
): 12.5 m/s
h, eq
CH
2
2
): 15.5 m/s
h,
HD
2
CE 2006
Director
ENH101-7