6. Put the screwing back on and tighten it firmly.
7. Calibrate the device with the new measuring electrode, see
chapter Operation.
Cleaning
Clean the device with a soft, damp and lint-free cloth. Ensure
that no moisture enters the housing. Do not use any sprays,
solvents, alcohol-based cleaning agents or abrasive cleaners,
but only clean water to moisten the cloth.
Cleaning the measuring probe
When cleaning the measuring probe, proceed with great
caution:
• Rinse the electrode with distilled water.
• Avoid unnecessary friction / contact with the glass ball
electrode as it may be damaged or age faster.
Repair
Do not modify the device or install any spare parts. For repairs
or device testing, contact the manufacturer.
9
Disposal
The icon with the crossed-out waste bin on waste
electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. For further return options provided by us please
refer to our website www.trotec24.com.
The separate collection of waste electrical and electronic
equipment aims to enable the re-use, recycling and other forms
of recovery of waste equipment as well as to prevent negative
effects for the environment and human health caused by the
disposal of hazardous substances potentially contained in the
equipment.
You are responsible for deleting any personal data stored on the
waste equipment to be disposed of.
In the European Union, batteries and accumulators must not be
treated as domestic waste, but must be disposed of
professionally in accordance with Directive 2006/66/EC of the
European Parliament and of the Council of 6 September 2006
on batteries and accumulators. Please dispose of batteries and
accumulators according to the relevant legal requirements.
Operating manual – pH measuring device BW10
EN
Need help?
Do you have a question about the BW10 and is the answer not in the manual?
Questions and answers