Virtual Media; Floppy Disk - Lindy 39415 User Manual

Ip access kvm switch classic
Table of Contents

Advertisement

5.2 Virtual Media

5.2.1 Floppy Disk

Follow the steps below to upload a virtual floppy image to the IP ACCESS KVM SWITCH
CLASSIC and create a virtual floppy drive on the host system
Create a Floppy Image
First, on your client PC you must create an image of your floppy disk which can be uploaded to
the IP ACCESS KVM SWITCH CLASSIC's built in memory.
UNIX and UNIX-like OS
To create an image file, make use of dd. This is one of the original UNIX utilities and is included
in every UNIX-like OS (UNIX, Sun Solaris, Linux).
To create a floppy image file copy the contents of a floppy to a file. You can use the following
command:
dd [ if=/dev/fd0 ] [ of=/tmp/floppy.image ]
dd reads the entire disc from the device /dev/fd0 and saves the output in the specified output
file /tmp/floppy.image. Adjust both parameters exactly to your needs (input device etc.)
21
Windows
Windows users should use the tool RawWrite for
Windows which is included on the supplied CD.
Launch RawWrite, you will see the window
opposite:
Insert your floppy disk into your floppy drive. Click
the Read tab and then click on
Select a name and destination for the floppy image
file and click the Read button. As the image is
written, you will see the progress as a percentage
figure in the bottom left hand corner.
When the image has been written you can upload it
to the IP ACCESS KVM SWITCH CLASSIC.
Uploading a Floppy Image
Click the Browse button and navigate to
the location of the image file, then click
the Upload button.
After the image has uploaded you will see the dialog below:
Click Reactivate. A virtual floppy drive will be installed on the host system and the image will be
downloaded to the virtual floppy drive from the IP ACCESS KVM SWITCH CLASSIC. You can
access the virtual floppy drive in the same way you would a regular drive.
You can download the image from the IP ACCESS KVM SWITCH CLASSIC to your remote
system by clicking the Download button.
Clicking Discard removes the virtual floppy image from the IP ACCESS KVM SWITCH
CLASSIC and from the hosts system.
22

Advertisement

Table of Contents
loading

Table of Contents