Initial Settings Menu; Using The Initial Settings Menu; Digital Audio Out Settings; Digital Out - Pioneer DV-566K-s Operating Instructions Manual

Initial Settings menu

Chapter 9
Initial Settings menu
Using the Initial Settings
menu
The Initial Settings menu gives you complete
control in setting up your DVD player,
including audio, and video output settings,
audience limitation settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
1 Press HOME MENU and select 'Initial
Settings' from the on-screen display.
HOME MENU
DVD
Audio Settings
Play Mode
Initial Settings
2 Select the setup category from the list
on the left, then select an item from the
menu list to the right.
3 Make the setting you want.
• The language options shown in the on-
screen display illustrations on the
following pages may not correspond to
those available in your country or region.
Video Adjust
Disc Navigator
Setup Navigator

Digital Audio Out settings

Digital Out

You only need to make this setting if you
connected this player to an AV receiver (or other
component) using one of the digital outputs.
• Default setting: On
Initial Settings
Digital Audio Out Digital Out
Video Output Dolby Digital Out
Language DTS Out
Display 96kHz PCM Out
Options MPEG Out
If at any time you need to switch off the digital
audio output, set this to Off, otherwise leave
it On.
• You can't switch on/off the optical and
coaxial outputs individually.
09
On
Off
51
En