Hawking HW9ACM User Manual page 145

Enable MAC
Filtering (1):
Client PC
MAC address (2):
Comment (3):
Add (4):
Reset (5):
Current MAC
Filtering Table (6):
Delete (7):
Delete All (8):
Check this box to enable MAC address based
filtering, and please select 'Deny' or 'Allow' to decide the
behavior of MAC filtering table. If you select deny, all MAC
addresses listed in filtering table will be denied from connecting
to the network; if you select allow, only MAC addresses listed in
filtering table will be able to connect to the network, and
rejecting all other network devices.
Please input the MAC address of computer
or network device here, dash ( - ) or colon ( : ) are not required.
(i.e. If the MAC address label of your wireless device indicates
'aa-bb-cc-dd-ee-ff ' or 'aa:bb:cc:dd:ee:ff', just input
'aabbccddeeff'
You can input any text here as the comment of this MAC address,
like 'ROOM 2A Computer' or anything. You can input up to 16
alphanumerical characters here. This is optional and you can
leave it blank, however, it's recommended to use this field to
write a comment for every MAC addresses as a memory aid.
Click 'Add' button to add the MAC address and associated
comment to the MAC address filtering table.
Remove all inputted values.
All existing MAC addresses in filtering table
will be listed here.
If you want to delete a specific MAC address entry, check the
'select' box of the MAC address you want to delete, then click
'Delete Selected' button. (You can select more than one MAC
addresses).
If you want to delete all MAC addresses listed here, please click
'Delete All' button.
138