Roof Rack Cross-Rails - Chevrolet Equinox 2006 Getting To Know Your

Getting to Know Your Equinox
16

Roof Rack Cross-Rails

(if equipped)
The roof rack cross-rails can be secured
in four positions along the roof rack side
rails. It's best to have a person on each
side of the vehicle to move each cross-
rail simultaneously.
Reposition the Cross-Rails:
1. Lift the end cap levers to release
the rail.
2. Move the cross-rail so it aligns with
the desired side rail hole.
3. Push down the end cap levers.
4. Slide the cross-rails slightly back and
forth until the lock pins fully engage
the holes. An audible click will be
heard. The end cap levers will not
fully seat until the lock pins engage
the side rail holes completely.
5. Try sliding the cross-rails to verify
they're secure and the end cap levers
stay tight.
When not using the roof rack, move the
cross-rails to the farthest rearward posi-
tion to help reduce wind noise.
See Section 2 of your Owner Manual.