Roof Rack Cross-Rails - Chevrolet 2008 Equinox Get To Know

To slide the seat forward or rearward:
1. Lift the release bar located under the
front of the seat cushion to unlock the
seat.
2. Slide the seat to the desired position;
then release the bar.
3. Try to move the seat forward and back-
ward to ensure it is locked in place.
See Section 1 of your Owner Manual.

Roof Rack Cross-Rails

(if equipped)
The roof rack cross-rails can be secured
in four positions along the roof rack side
rails. It's best to have a person on each
side of the vehicle to move each cross-
rail simultaneously.
To adjust the cross-rails:
1. Lift the end cap levers to release
the rail.
2. Move the cross-rail so it aligns with
the desired side rail hole.
3. Push down the end cap levers.
4. Slide the cross-rails slightly back and
forth until the lock pins fully engage
the holes. An audible click will be
heard. The end cap levers will not
fully seat until the lock pins engage
the side rail holes completely.
5. Try sliding the cross-rails to verify
they're secure and the end cap levers
stay tight.
To help reduce wind noise when not
using the cross-rails, move the front rail
to the second position and move the
rear rail fully rearward to the fourth
position.
See Section 2 of your Owner Manual.
17