Basic Playback Controls; Resume And Last Memory - Pioneer DV-410V-K Operating Instructions Manual

Basic playback controls

The table below shows the basic controls on
the remote for playing discs. The following
chapter covers other playback features in
more detail.
Button What it does
 PLAY
Starts playback.
If the display shows RESUME
or LAST MEM playback starts
from the resume or last
memory point (see also

Resume and Last Memory

below.)
 PAUSE
Pauses a disc that's playing, or
restarts a paused disc.
 STOP
Stops playback.
See also Resume and Last
Memory below.

Press to start fast reverse
scanning. Press  PLAY to
(remote only)
resume normal playback.

Press to start fast forward
scanning. Press  PLAY to
(remote only)
resume normal playback.
 PREV
Skips to the start of the current
track, title or chapter, then to
previous tracks/titles/chapters.
 NEXT
Skips to the next track, title or
chapter.
Numbers Use to enter a title/chapter/
(remote only)
track number. Press
select.
• If the disc is stopped,
playback starts from the
selected title (for DVD) or track
(for CD/Video CD).
• If the disc is playing,
playback jumps to the start of
the selected title (VR mode
DVD-RW), chapter (DVD-Video)
or track (CD/Video CD).
Resume and Last Memory
When you stop playback of a DVD, CD, or
Video CD or DivX video/WMV discs,
is shown in the display indicating that you can
resume playback again from that point.
If the disc tray is not opened, the next time you
start playback the display shows
playback resumes from the resume point. (If
you want to clear the resume point, press
 STOP while
With DVDs and Video CDs, if you take the disc
out of the player after stopping playback, the
last play position is stored in memory. If the
next disc you load is the same one, the display
shows
LAST MEM
For DVD-Video discs, the player stores the play
position of the last five discs. When one of
these discs is next loaded, you can resume
playback.
Note
• The Last Memory function doesn't work
with VR format DVD-R/-RW discs.
• If you don't need the Last Memory function
when you stop a disc, you can press
 OPEN/CLOSE to stop playback and
open the disc tray.
ENTER
to
RESUME
RESUME
is displayed.)
RESUME
and playback will resume.
04
and
21
En