Opening A Sealed Bag; Storage; Cleaning And Maintenance; Safety Information - CASO DESIGN VC350 Instruction Manual

Vacuum sealer system
Hide thumbs Also See for VC350:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 32
Please note
► Suggest to vacuum seal one bag within 1 minute to let the appliance cool down
enough.
► In order to vacuum seal liquid-based foods, such as soups, casseroles or stew, freeze
them first in a baking pan or tempered dish, vacuum seal them, label and stack them
in your freezer as soon as they are in frozen solid.
► Blanch the vegetables by cooking briefly in boiling water or microwave oven, cool them
down , then vacuum seal them in convenient portions.
► To vacuum seal the foods not frozen, two extra inches are required for bag length to
allow for expansion while freezing. Place the meat or fish on a paper towel and
vacuum seal with the paper towel in the bag, this way will help to absorb moisture from
the foods.
► Before storing the foods such as tortillas, crepes or hamburger, use wax or parchment
paper between them to stack the pieces, this will be easier to remove some of the
food, reseal the rest and immediately replace in the freezer.
► The vacuum sealer can't be used directly for vacuum sealing canisters or canning jars

17.9 Opening a sealed bag

Cut the bag straight across with scissors or the cutter, just inside the seal.

17.10 Storage

Store the unit in its upright position, out of the reach of children.
PLEASE NOTE
► Always unplug the appliance from its outlet immediately after using and before
cleaning.
► For the correct storage, please slightly close the cover, do not lock, it will deform the
gaskets and affect the machine function.

18 Cleaning and Maintenance

This chapter provides important information on properly cleaning and maintaining your
vacuum sealer.

18.1 Safety information

Attention
Please observe the following safety notices, before cleaning the unit to avoid
damage to the unit or personal injury:
► To ensure optimum performance, the unit must be cleaned regularly. Failure to clean
the unit regularly can lead to potential malfunctions, as well as safety and health risks.
► Turn off and unplug the unit prior to cleaning.
► The sealing strip remains hot after use. Wait a few minutes until the strip has cooled
before cleaning.
45

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents