Table of Contents
Advertisement
Using a Tablet Monitor
Buttons
(1) Side button
: You can set the function of the pen side button. By
default, the upper side of the side button (Side
Button 2) triggers a double click event, whereas
the lower side (Side Button 1) triggers a right
mouse click event.
(2) Pen offset value
: The tablet monitor detects the power (pressure)
when you touch the screen with a pen. If the
pressure sensitivity is not appropriate due to pen
replacement or computer restart-up, calibrate the
pen offset value appropriately.
- Auto Setting: If you click on this check box, the pen offset value will be automatically
adjusted.
- Adjust: You can adjust pen pressure (sensitivity) manually.
When you un-check the Auto Setting check box and click the Adjust button, the
following message will be displayed. Touch the screen with a pen. Then, pressure
(sensitivity) sensed by the screen will be set. Once touching is detected, the "Adjusting,
please wait" message will be changed to the "OK" message.
Press the button to complete the value setting.
(3) Click Pressure
: You can set "click pressure" from 0% to 30%. You can easily select pressure sensitivity
among pre-set values in the USB tablet drive. Weaker pressure will be applied as the
value decreases.
(3) Test
: You can test the settings. Click the Test button to pop up the window where you can
test pen pressure (sensitivity)
(4) Default
: Click this button to return to the default setting values.
A11
Advertisement
Table of Contents
