Pioneer Kuro Elite PRO-101FD Operating Instructions Manual page 72

Use Other Equipment With Your Flat Panel Display
06
Drive Mode
This option optimizes the picture quality depending on the content (refer to "5.3.10 Adjust Color Signals" for more
information).
Note: Drive Mode is available only for input video signals.
FRC Mode
The FRC option allows switching the frame rate conversion.
Note: FRC Mode is available only for input PC signals.
Fan Control
This option switches the control method for the rear cooling fan of the flat panel display.
The Max setting is effective for special high-temperature installations. However, since the fan noise increases, the
effect on the surrounding area should be taken into consideration.
On-screen Display
This option sets the menu display to On or Off.
Note: This setting applies to all input sources.
72
En
Parameter
Default* does not switch the frame rate conversion
Sync switches the frame rate conversion
Parameter
Auto* automatically controls using an internal
temperature sensor
Max for maximum rpm (Auto Control: Off)
Parameter
On* displays the current menu when pressing DISPLAY
Off does not display the screen when:
Description
Description
Description
• pressing DISPLAY or AV SELECTION
• switching the input source
• adjusting the volume
(Screen components such as Home Menu, User
Menu and messages remain on the screen even
when setting the On-screen Display option to
Off.)
*Factory default
*Factory default
*Factory default