Installation And Connections; Installation Of The Unit - Pioneer PDP-502MXE Operating Instructions Manual

Installation and Connections

Installation of the unit

Installation using the supplied display stand
Be sure to fix the supplied stand to the installation
surface.
Use commercially available M8 bolts that are 25 mm
longer than the thickness of the installation surface.
1 Fix the supplied stand to the installation surface at
each of the 4 prepared holes using commercially
available M8 bolts .
Front
798 mm
110 mm
2 Insert the supplied washer (large) into the stand.
3 Take off the hole rivets A and A'of this unit using
a screwdriver or a coin.
A
8
<ARE1350> En
Rear
A'
4 Set this unit in the stand.
5 Fix this unit using the supplied washer and bolt.
CAUTION
Because this unit weighs about 40 kg and has little depth making
it unstable, please use 2 people or more when packing, carrying
or installing.
Use a 6 mm hex wrench
to bolt them.