Summary of Contents for Swingline Stack-and-Shred 250X
Page 1
Mains de Coupe en travers Moulinette Libre Manos de Corte enfadado Desfibradora Libre Instruction Manual Manuel d’utilisation Manual de instrucciones To register this product go to www.swingline.com Pour enregistrer ce produit allez sur www.swingline.com Para registrar este producto vaís en www.swingline.com...
U Credit card entry slot U CD entry slot U CD bin ‘in use’ location Thank you for choosing this shredder from Swingline. Please review these instructions to ensure you are operating the shredder correctly. U Paper stack viewing window...
Page 4
Paper Clips Paper Clips Staples Staples Sheet Sheet auto-feed bin: Swingline recommends • Stapled paper 1 inch/25mm • Paper clip paper 1 inch/25mm • 11x17 folded in half max. that staples and paper within the corner within the corner 2 sheets clips are removed and •...
https://www.supplychimp.com/ Jam Free Technology in manual Auto-feed Technology feed slot The Stack and Shred 250X has been designed to automatically shred up to 250 sheets from the auto-feed chamber and up to 8 sheets through Sensors in the paper feed area measure the thickness of paper about the manual feed slot.
Credit Card Shredding liability for product performance or safety when other types of lubricants are used on any part(s) of this machine. Swingline Lift up the paper loading door (see fig 4). recommends using an oil sheet after the bin has been emptied three times (and for each ongoing three bin cycle thereafter).
Page 7
https://www.supplychimp.com/ Troubleshooting Guide for Stack-and-Shred 250X APPLICABLE MACHINES QUESTION ANSWER 100X 250X 500X The shredder will not Check power switch on the back of the machine is turned on. ( start. Check that the Auto button ( ) has been pressed or the switch is in the Auto position and the power switch on the back has been turned on.
Page 8
How should I maintain Use Swingline oil sheets to lubricate the cutting head, do not use my shredder? other types/brands of oil Clean the auto-start infra red sensor on a regular basis (see point 3a).
Need help?
Do you have a question about the Stack-and-Shred 250X and is the answer not in the manual?
Questions and answers