Using Cd Text - Pioneer PDR-W839 Operating Instructions Manual

5 Recording Features
DISPLAY
TIME /CHARA
ABC
1 2
GHI JKL
4
5
PQRS TUV
7 8
MARK
10/0
ENTER
7

Using CD text

You can name a CD-R or CD-RW so that when you load the disc
into the player, the disc name, track title, or artist name can appear
in the display. Each title can be up to 120 characters long,
including spaces. You can store all the text (up to 2000 characters)
for up to three non-finalized discs in the recorder at one time. This
is useful when you want to edit the text during another recording
session with the same disc.
Be careful: When you set text for a fourth disc, the oldest text
information (for the first disc) is deleted from memory.
Once you finalize a CD-R, you can't change the text information.
With CD-RW discs, text is deleted when you erase the corresponding
track.
You can input characters using the front panel, remote control, or a
connected IBM-compatible PC keyboard (see page 10).
1 Make sure the disc you want to name
is loaded into the recorder and is
stopped.
For track names: Before proceeding to step 2, you must
choose the track you want to name by turning the jog dial.
You can also name tracks during playback.
2 Press NAME.
Press to switch between disc and artist name:
NAME
DISC NAME
If you are naming a track, go to step 3.
The default is disc title. Press 7 at any time to exit.
3 Wait two seconds after making your
selection, or press ENTER.
If the disc doesn't already have a name, the character
display is blank, with a blinking cursor on the first
character.
24
En
DEF
3
MNO
6
COMPACT DISC RECORDER / MULTI-CD CHANGER
WXYZ
9
NAME
ARTIST NAME
◊ÛB¿ˆ˘≤/
3
- COMPACT DISC MULTI CHANGER
If the disc is already named, the character display shows the
name (or the first 12 characters if it is too long to be
displayed completely), with a blinking cursor under the first
character.
4 Select/change the character at the
current cursor position by turning
the jog dial.
See below for the complete list of letters, numbers, and
symbols available.
If you're using the remote control, use numbers keys 1-9 for
numbers and the letters shown above each key. Press a key
repeatedly to cycle through the letters and numbers on that
key.
0!"#$%&'()*+,-./<=>
?@[]ˆ_'{|}<space>
Characters available for disc and track names:
ABCDEFGHIJKLMNOPQRST
UVWXYZ
abcdefghijklmnopqrstuvwxyz
1234567890
!"#$%&'()*+,-./<=> ?@[]ˆ_'{|}<space>
5 Change between upper case, lower-
case, and numbers/symbols by
pressing DISPLAY/CHARA.
The character at the current cursor position changes
between uppercase, lowercase, and numbers/symbols with
each press.
COMPACT DISC DIGITAL RECORDER
NAME
DISPLAY
CHARACTER
7
Legato Link Conversion
CD TEXT
A B C D E F
1 2 3
GH I JK L M N O
4
5 6
PQ R S T U V WXYZ
9
7 8
MARK TEXT
10/0 >10
¶
REC VOL
PUSH ENTER