The Log/Timer Functions; The Timer Function - Simrad IS20 Combi Manual

3 The log/timer functions

The timer function

The timer function is used to measure time and distance
after a race start.

The timer is by default shared between interconnected
SimNet units, and all timer values will be identical. The
units can however be set up in separate SimNet Display
groups as described on page 23.
The softkey functions are further described in the
following pages.
Setting the countdown time
Range
20 min - 1

If the countdown time is set to OFF, the timer function
will work as a passage log and timer!
When a timer page is displayed,
basic key operation is replaced by
functions indicated by softkeys.
Change per step
1 min
The log/timer functions
Default value
5 min
|
17