Honda HHB25 Owner's Manual page 29

3. Press the priming pump several times until a flow in the fuel return
tube (transparent tube) is visually noticed.
4. Hold the handy blower by the handle securely. Pull the starter grip
lightly until you feel resistance, then pull briskly in the direction of
the arrow as show below. Return the starter grip gently.
HANDLE
CAUTION:
• Do not allow the starter grip to snap back against the engine. Return
it gently to prevent damage to the starter grip and the other parts.
• Damage may result if the starter grip is pulled while the engine is
running.
• Place the handy blower on a firm level ground before starting the
engine.
• Be sure that the people and pets are away from the handy blower,
especially behind you, before pulling the starter grip.
Direction to pull
PRIMING PUMP
FUEL RETURN TUBE
(TRANSPARENT TUBE)
STARTER GRIP
27