Inateck BCST-70 User Manual page 11

2. Scan "Delete Beginning Character(s)" Barcode or "Delete Ending Character(s)"
Barcode
Delete Beginning Character(s)
3. Scan the digit(s)barcode to be deleted. If 13 characters need be deleted, please
scan the barcodes of 1 digit and then 3 digits.
（*）0 digit
2 digits
4 digits
6 digits
8 digits
4.Scan "Exit with Save" Barcode to end the setting
Note: Refer to the setting of "delete 0 digit character" if no character should be
deleted.
Exit with Save
Delete Ending Character(s)
1 digit
3 digits
5 digits
7 digits
9 digits
9