6 additional line inputs. It has balanced XLR outputs, a 1/4” (6.35 mm) mono output that can be used to connect the DN-312X to a remote mixer, a pair of RCA stereo outputs that can be used to connect to a remote recording device, and 1/4” (6.35 mm) mic monitoring port that can be used to monitor the mics’...
Features Front Panel 1. Power Switch: Use this switch to power DN-312X on or off. 2. Power Light: This light illuminates when DN-312X is powered on. 3. Mic In Level: Turn these knobs to set the input level of the corresponding mic/line inputs (Channels 1–6).
Alternatively, use the DC power input, described below. (If both power inputs are connected to power outlets, DN-312X will draw its power from the AC power input.) 2. Fuse Cover: If the fuse is broken, use a screwdriver or other tool to lift this tab, and replace the fuse with a fuse with the same rating.
Page 5
Alternatively, use standard stereo RCA cables to connect the Rec Outs on the rear panel to it. 5. Use the included power cable to connect DN-312X to a power outlet. 6. Power on all of your audio sources (Blu-ray players, stereos, microphones, etc.).
Specifications are subject to change without notice. Trademarks & Licenses Denon is a trademark of D&M Holdings Inc., registered in the U.S. and other countries. Blu-ray™ and the logo are trademarks of the Blu-ray Disc Association. All other product or company names are trademarks or registered trademarks of their...