Screw with washer
Use the enclosed umbracho screw
The enclosed screw is screwed through the front coat to
ease the mounting of the main box. Use a 6 mm
umbracho.
UNIPRO – The original Laptimer
The main Box is mounted behind the front cover.
First, a 6.5 mm hole is drilled in the cover. Some karts have a
recess in the coat suitable for drilling the hole in. If you press
hard on the sticker, you can see where to drill the hole. It is a
good idea to look from the back before drilling!
Front cover
Vibration damper
Main box
23