Playing Songs On Ipod; Basic Operations; Browsing For A Song; Displaying Text Information On Ipod - Pioneer DEH-50UB Operation Manual

Cd rds receiver
Table of Contents

Advertisement

Available languages

Available languages

Section
02
Operating this unit

Playing songs on iPod

For details about the supported iPod, refer to
®
iPod
compatibility on page 5.

Basic Operations

% Fast forward or reverse
Push and hold MULTI-CONTROL left or right
for about one second and release.
% Select a track (chapter)
Push MULTI-CONTROL left or right.
Notes
! When using an iPod, iPod Dock Connector to
USB Cable is required.
! Read the precautions for iPod on page 35.
! While iPod is connected to this unit, PIONEER
(or
(check mark)) is displayed on the iPod.
! If an error message such as ERROR-19 is dis-
played, refer to Error messages on page 31.
! When the ignition switch is set to ACC or ON,
the iPod's battery is charged while the iPod is
connected to this unit.
! While the iPod is connected to this unit, the
iPod cannot be turned on or off.
! Before connecting the dock connector to the
iPod, disconnect the headphones from the
iPod.
! The iPod is turned off about two minutes after
the ignition switch is set to OFF.

Browsing for a song

Operations to control an iPod with this unit is
designed to be as close to the iPod as possible
to make operation and song search easy.
! Depending on the number of files in the
iPod, there may be delay when displaying a
list.
! If the characters recorded on the iPod are
not compatible with this unit, those charac-
ters are not displayed.
1
Press LIST to switch to the top menu of
the list search.
2
Use MULTI-CONTROL to select a cate-
gory.
Turn to change the category; press to select.
20
En
PLAYLISTS (playlists)—ARTISTS (artists)—
ALBUMS (albums)—SONGS (songs)—
PODCASTS (podcasts)—GENRES (genres)—
COMPOSERS (composers)—AUDIOBOOKS
(audiobooks)
List for the selected category is displayed.
# You can start playback throughout the se-
lected category by pressing and holding
MULTI-CONTROL. You can also perform this op-
eration by pushing and holding
MULTI-CONTROL right.
# You can also change the category by pushing
MULTI-CONTROL up or down.
# You can also select the category by pushing
MULTI-CONTROL right.
# To return to the previous list, push
MULTI-CONTROL left.
3
Repeat step 2 to find a song you want
to listen to.
# To return to the previous category (one level
higher), press BACK. You can also perform this
operation by pushing MULTI-CONTROL left.
# To return to the top tier of categories, press
and hold BACK.
# To return to the ordinary display, press
BAND/ESC or LIST.
# If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.
Displaying text information on
iPod
% Press DISP to select the desired text in-
formation.
Play time—song title—artist name—album
title
# If the characters recorded on the iPod are not
compatible with this unit, those characters are
not displayed.
Notes
! You can scroll the text information to the left
by pressing and holding DISP.
! When Ever Scroll is set to ON at the initial set-
ting, text information scrolls continuously in
the display. Refer to Switching the Ever Scroll
on page 29.

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents