Silk'n Infinity Instructions For Use Manual page 18

Application Methods
PULSING
PULSING is the best technique for working with higher energy levels as it enables better control
of skin coverage.
When pulsing, Silk'n Infinity™ pulses should be administered in rows, starting at one end of each
row and progressing sequentially towards the other end helps you avoid treating the same area
more than once or overlapping skin areas.
When pulsing, the Silk'n Infinity™ TREATMENT SURFACE is designed to create temporary
slight shadows of the treated area border. In every repositioning of the TREATMENT SURFACE
use these pressure marks to guide you for proper positioning of the next pulse, avoiding both
gaps and overlaps between pulses.
GLIDING
GLIDING is the best way to work within the low energy levels and achive a fast and more
efficient session.
When Gliding, hold the PULSE TRIGGER down continuously, and using a slow, sliding motion
while keeping contact with the skin. Smoothly move the device along the treatment area. In the
lower energy levels the device takes only 1-1.5 seconds to recharge between pulses and provides
a nonstop sequence of flashes.
Try to avoid overlapping pulses!
Do not treat the same area of skin more than once per hair removal session!
Treating the same area of skin more than once per treatment session
increases the likelihood of adverse effects.
If your skin blisters or burns, STOP USE IMMEDIATELY!
16