Table of Contents
Advertisement
INSTRUMENTS
the symbol triangle. Press button (1) to take distance measuring (hypothenuse of triangle). The result is
displayed in the second line. This measurement can be taken in the indirect measurement function. Press
and hold button (1) for 2 sec. After second pressure of the button (1) value is fixed.
The second distance to be measured is blinking in the symbol triangle. Press button (1) to take distance
measuring. There is a right angle between laser beam and the length you need to measure. The result of the
measurement is displayed in the second line. The result of the function is displayed in the first line.
MESSAGE CODES
All message codes are displayed with either "Info". Following mistakes can be corrected.
INFO
204
Data overflow
205
Measurement range transfinite
CAUSE
REMEDY
Repeat procedure
Use the meter in distance allowed
COSMO MINI
11
Advertisement
Table of Contents
Need help?
Do you have a question about the COSMO MINI and is the answer not in the manual?