Philips HQC486 Directions For Use Manual page 4

ENGLISH
8
4 Open the housing (fig. 13).
Insert a screwdriver into one of the grooves next to the socket for the appliance plug.Turn the
screwdriver to separate the two housing halves.
5 Insert a screwdriver into the small slot in the printed circuit board marked with an arrow.
Push the screwdriver down until part of the printed circuit board breaks off (fig. 14).
6 Pull the battery out of the appliance (fig. 15).
Dispose of the battery and the other components in an environmentally safe way.
Do not connect the appliance to the mains again after it has been opened!
Guarantee & service
If you need information or if you have a problem, please visit the Philips Web site at www.philips.com
or contact the Philips Customer Care Centre in your country (you will find its phone number in the
worldwide guarantee leaflet). If there is no Customer Care Centre in your country, turn to your
local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal
Care BV.