ProCurve 8200zl Series Management And Configuration Manual page 402

Configuring for Network Management Applications
LLDP (Link-Layer Discovery Protocol)
Figure 14-16. Example of Viewing the General LLDP Configuration
14-46
Displays the LLDP global configuration, LLDP port status, and
SNMP notification status. For information on port admin status,
refer to "Configuring Per-Port Transmit and Receive Modes" on
page 14-52.
For example, show lldp config produces the following display when the switch
is in the default LLDP configuration:
Note: This value corresponds to
the lldp refresh-interval
command (page 14-48).
Med Topology Trap Enabled
-------------------------
False
True
False
False
True
False
False