Configuring Optional Poe Port Identifiers - ProCurve 8200zl Series Management And Configuration Manual

Power Over Ethernet (PoE) Operation
Configuring PoE Operation
11-22

Configuring Optional PoE Port Identifiers

The Configured Type field in the MIB allows you to configure a unique identifier
for a PoE port that indicates the intended use for that port. Such identifiers
are useful when viewing PoE status with the following commands:
show power-over-ethernet brief (page 11-26)
show power-over-ethernet < port-list > (page 11-28)
To configure a unique identifier for one or more PoE ports, use the switch's
setmib command to change the identifier setting in the switch's MIB (Manage-
ment Information Base), as described in the following steps.
1. Use the walkmib pethPsePortType.< slot-# > command to determine the MIB-
based port number for the port to which you want to assign a Configured
Type identifier. On the 8212zl switch the slot numbering is as follows:
Slot
A
B
C
D
E
F
Use the setmib pethPsePortType.< slot-# >.< port-# > -D < identifier-string >
2.
command to configure the identifier you want for a specific port.
For example, suppose that you have a PoE Module installed in slot A and want
to assign the identifier "Wireless-1" to port 5 in this slot. To do so, you would
use the following commands:
Slot Number
Used in the MIB
1
2
3
4
5
6