Listening To Station Presets; Listening To Other Sources - Pioneer S-DV515 Operating Instructions Manual

03 Getting started
2 Press SYSTEM SETUP.
3 Use the
buttons to choose 'St. Memory?' then
press ENTER.
4 Use the
buttons to select the station preset you
want.
There are 30 preset locations; each can store
one station preset.
5 Press ENTER to save the station preset.
• If the system is unplugged from the power
supply completely, saved stations will
remain for several days, after which you'll
have to save them again.

Listening to station presets

1 Make sure the TUNER function is
selected.
2 Use the ST +/– buttons to select a
station preset.
30
En
(cursor left/right)
(cursor up/down)

Listening to other sources

You can connect up to three external sources
(TV, satellite receiver, etc.) to this system,
including one digital source. See also
Connecting auxiliary components on page 71.
STANDBY/ON
CD FM/AM
DVD TUNER
DISPLAY
1
4
1 If the system isn't already on, press
STANDBY/ON to switch on.
Also make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2 Select the source you want to listen to.
• If you're using the remote control, press
TV to select the TV IN input, or use the
LINE (L1/L2) button to select the LINE 1 or
LINE 2 input.
3 If necessary, start playback of the
external source.
L1/L2
TV LINE
OPEN CLOSE
0
8
3 ¡
4
7