Table of Contents
Advertisement
OPERATION
WARNING:
DO NOT GRASP THE EXPOSED CUTTING BLADES OR CUTTING EDGES WHEN PICKING UP OR HOLD-
ING THE HEDGE TRIMMER.
WARNING:
BEFORE CONNECTING YOUR HEDGE TRIMMER TO THE POWER OUTLET, ALWAYS TURN THE
SWITCH TO THE OFF POSITION. FAILURE TO CHECK COULD RESULT IN ACCIDENTAL START–UP
CAUSING SERIOUS INJURY.
ON/OFF SWITCHES (Fig. 2)
The hedge trimmer has a trigger switch and a Lock-OFF switch. They must be used together to prevent accidental
starting or injury.
Turn on the hedge trimmer:
1. Plug the power cord into an AC power outlet.
2. Push the Lock-OFF switch (1) into the down position and hold.
3. Squeeze the trigger switch (2) to turn on the hedge trimmer.
4. Release the Lock-OFF switch. The trimmer will stay on as long as the trigger switch is squeezed.
Turn off the hedge trimmer:
1. Release the trigger switch (2).
2. Allow at least 5 seconds for the cutting blade to stop moving.
3. The hedge trimmer will be locked OFF until you press the Lock-OFF switch again.
Fig. 2
1
2
8
Advertisement
Table of Contents
