Table of Contents
Advertisement
SAFETY INFORMATION
WARNING:
TO AVOID ELECTRICAL HAZARDS, FIRE HAZARDS, OR DAMAGE TO THE TOOL, USE PROPER CIRCUIT
PROTECTION. YOUR HEDGE TRIMMER IS WIRED AT THE FACTORY FOR 120 V OPERATION. CON-
NECT TO A 120 V, 15 A CIRCUIT AND USE A 15 A TIME DELAYED FUSE OR CIRCUIT BREAKER. TO
AVOID SHOCK OR FIRE WHEN THE POWER CORD IS WORN, CUT, OR DAMAGED IN ANY WAY,
REPLACE IT IMMEDIATELY.
DOUBLE INSULATED
This hedge trimmer has a plug that looks like the one shown in Fig.A.
The hedge trimmer is double insulated to provide a double thickness of insulation between you and the tool's
electrical system. All exposed metal parts are isolated from the internal metal motor components with protective
insulation.
WARNING:
TO AVOID INJURY, WHEN SERVICING THE HEDGE TRIMMER USE ONLY IDENTICAL REPLACEMENT
PARTS.
WARNING:
DOUBLE INSULATION DOES NOT TAKE THE PLACE OF NORMAL SAFETY PRECAUTIONS WHEN
OPERATING THIS TOOL.
WARNING:
TO AVOID ELECTROCUTION:
1. Use only identical replacement parts when servicing a tool with double insulation. Servicing should be
performed by a qualified technician.
2. Do not use in wet or damp areas or expose to rain.
GROUNDING INSTRUCTIONS
IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least resistance for
electric current and reduces the risk of electric shock. This tool is equipped with an electric cord that has a POLAR-
IZED plug. The plug MUST be plugged into a matching outlet that is properly installed and grounded in accordance
with ALL local codes and ordinances.
DO NOT MODIFY THE PLUG PROVIDED. If it will not fit the outlet, have the proper outlet installed by a qualified
electrician.
CAUTION: IN ALL CASES, MAKE CERTAIN THE RECEPTACLE INQUESTION IS PROPERLY GROUNDED. IF
YOU ARE NOT SURE, HAVE A CERTIFIED ELECTRICIAN CHECK THE RECEPTACLE.
WARNING:
THIS HEDGE TRIMMER IS FOR OUTDOOR USE ONLY. DO NOT EXPOSE TO RAIN OR USE IN DAMP
LOCATIONS.
4
Advertisement
Table of Contents
