Voice Recognition - Cadillac CT6 CUE 2017 Manual

70

VOICE RECOGNITION

Voice Recognition
Voice recognition allows for
hands-freee operation within the
navigation, audio, and phone
applications. This feature can be
g
started by touching on the steering
wheel controls or by touching
the infotainment display.
However, not all features within these
areas are supported by voice
commands. Generally, only complex
tasks that require multiple manual
interactions to complete are
supported by voice commands.
For example, tasks that take more
than one or a two button touch such
as selecting a song or artist to play
from a media device would be
supported by voice commands. Other
tasks, like adjusting the volume or
seeking up or down, are audio features
that are easily performed by touching
one or two buttons, and are not
supported by voice commands.
In general there are flexible ways to
speak commands for completing the
tasks. Most of them, except
destination entry and voice keypad,
can be completed in a single
command. If the task takes more than
one command to complete, the first
command should be to indicate the
kind of task to be performed, like
Navigation Destination Entry. The
system replies with prompts that lead
you through a dialogue to enter the
g
on
necessary information. For example,
if a destination for route guidance is
needed, say Navigation or
Destination Entry.
If your language supports it, try
stating a One-Shot command, such as
Navigate to Address one two three
Main Street, Lansing Michigan. This
type of destination entry command is
supported in some languages. Another
example of a One-Shot Destination
Entry command is, Navigate to Place
of Interest Hotels. If these
commands do not work, try saying,
Navigate to Place of Interest or
Navigate to Address and the system
will do the rest.
Voice recognition can be used when
the ignition is on or when Retained
Accessory Power (RAP) is active. See
Retained Accessory Power (RAP) in
the owner manual.
Using Voice Recognition
Voice recognition becomes available
once the system has been initialised.
This begins when the ignition is
turned on. Initialisation may take a
few moments.
g
1. Press on the steering wheel
controls to activate voice
recognition, or touch
infotainment display.
If voice recognition is started
from the steering wheel
controls, the instrument
cluster displays the selections
and visual dialogue content.
If voice recognition is started
from the infotainment
display, the selections and
visual dialogue content are
displayed on both the
infotainment display and the
instrument cluster display.
2. The audio system mutes and the
system plays a prompt followed
by a beep.
g
on the