Cadillac CT6 CUE 2017 Manual page 38

Table of Contents

Advertisement

Menu (DVD/BD/USB/HDMI/VCD)
Only available in D (Drive). Press
(Menu) to display these options:
Tone Settings: Use to set bass,
mid, and treble on speakers only.
Once set, tone settings are for all
sources.
Auto Volume: Adjusts the volume
of the audio based on the speed or
ambient noise of the vehicle. Some
vehicles may be equipped with the
Bose AudioPilot system. In these
cases, the Auto Volume main
menu item is replaced with the
Bose AudioPilot menu item. AVC
or Bose AudioPilot is available to
use with any source mode.
Traffic Announcements: Displays
traffic alerts in the RSI system.
The video will continue to play
and the audio will mute,
depending on the alert.
Closing the Menu (DVD/BD)
Touch Back or Exit to close a menu.
This will return to the previously
viewed screen.
Power
y
Press the power button on the front
screen to turn the RSI screen on or
off. The front screen will continue to
operate when the overhead screen is
turned off. A red lit power button
indicates the rear screens are on.
A white lit power button indicates the
rear screens are off.
Headphones
1. Power Indicator Light
2. Channel 1 or 2 Switch
3. Volume Control
4. Power Button
5. Battery Cover
RSI includes two 2-channel new
digital wireless headphones. The
headphones are used to listen to
REAR SEAT INFOTAINMENT
various multimedia. The wireless
headphones have a power button,
Channel 1 or 2 Switch, and a volume
control. The Digital headphones
cannot be interchanged with previous
models of GM headphones.
Press the power button to turn on the
headphones. A light on the
headphones comes on. A flashing light
indicates the headphones are not in
range. Move them closer to the left
side of the screen until the light stops
flashing. If the light does not come
on, check the batteries. Intermittent
sound or static can also indicate weak
batteries. See Battery Replacement
later in this section.
Turn the headphones off when not
in use.
Press the centre of the right side of
the headphone to change the channel.
Channel 1 will provide audio
associated with screen 1 and channel
2 will provide audio associated with
screen 2.
Infrared transmitters are on the top of
the left seatback video screen. The
headphones shut off automatically to
save battery power if the RSI system
37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents