Cadillac CT6 CUE 2017 Manual page 32

Subtitles
Angle (BDMV, DVD-V, DVD-A
only): Select an angle by using the
up and down arrows to highlight
the option and press ENTER or
the right arrow.
Screen Mode: Adjusts the framing
on the RSI display. Select Normal,
Wide, or Zoom. Screen Mode only
applies to video sources and
should be maintained if the disc is
ejected.
Wired Headphones: Use to listen
to audio on the wired headphones.
The headphone audio plays
depending on which screen is
selected. The default is screen 1
audio.
Brightness: Increase the brightness
by using the up or right arrow and
decrease the brightness by using
the down or left arrow. Each
screen brightness can be adjusted
separately.
Player Setup: See "Player Setup
BD/DVD" following.
Display Off: Lowers the screen but
selected audio will continue
to play.
Screen Tilt: Adjusts screen tilt
angle.
Remember RSE Status: Returns
the screens to the same position
when the vehicle was turned off.
Software Information
Player Setup BD/DVD
Player Setup may include:
Default Menu Language: With no
disc inserted, select from a list of
languages or enter a
language code.
REAR SEAT INFOTAINMENT
Default Audio Language: With no
disc inserted, select from a list of
languages or enter a
language code.
Default Subtitle Language: With
no disc inserted, select from a list
of languages or enter a
language code.
Audio Compression: When on, the
RSI will attempt to reduce the
difference between the audio highs
and lows. CUSTOM will increase
dialogue volume.
Pseudo Resume: When on, the RSI
will attempt to resume playing the
video where it left off after the
vehicle has been restarted. This
can be turned on or off.
Auto Enter: When on, the RSI will
attempt to start playing the video
when the disc is inserted. This
feature can be turned on or off.
Not all discs support this feature.
Audio Channel (AVCREC, DBAV,
DVD-VR only) contains: Stereo,
Left Mono, and Right Mono. Audio
31