Countdown Function; Specifications; Other Functions - Clas Ohlson EF700ET Manual

5. Use [ ▼ ] to move backwards in reverse order, press [ SET ]
to save the settings when the correct day is shown.
6. The hour digit will now start to flash, select the correct hour
using the up/down arrows [ ▲ ] and [ ▼ ], press [ SET ] to
save the setting when the correct hour is shown on the display.
7. The minute digits will start to flash, select the correct minute
using the up/down arrows [ ▲ ] and [ ▼ ], press [ SET ] to
save the setting when the correct time is shown on the display.
8. Other programmes can be set or set programmes can be
changed by: repeating steps 2 to 7 described above.
Manual Function
NOTE: The symbol appears in the display when the time switch is
activated in either the on or off mode according to the programme:
• Press [ RCL ] and hold until the symbol disappears, in order
to override the pre-programmed settings and control
the ON/OFF activation manually.
• Press [ RCL ] one more time in order to return to
the pre-programmed settings. The icon will reappear.
• The display automatically returns to displaying the time
if no button is pushed within 15 seconds.

Countdown function

1. Press [ P ] when "CLOCK" is shown on the display until
the "CD" symbol appears.
2. Press [ SET ] in order to begin programming. The hour display
begins to flash.
3. Select the correct hour using the up/down arrows [ ▲ ] and
[ ▼ ], press [ SET ] to save the setting when the correct hour
is shown on the display.
4. The minute digits will start to flash, select the correct minute
using the up/down arrows [ ▲ ] and [ ▼ ], press [ SET ] to save
the settings. The countdown function can be set from 1 min.
up to 99 hrs. and 59 min.
5. The display must be in CD mode in order to start
the countdown function. Push [ ON/OFF ] in order to start.
"CD" flashes as a reminder that a countdown is in progress
when the display is in the CLOCK mode.
6. Press [ ON/OFF ] in order to stop a coundown (this only
works when "CLOCK" shows on the display.)
7. When the countdown programme is active it is the main
programme. Even if there are other programme settings,
the countdown will continue for its set time and
subsequently turn off the power.
GREAT BRITAIN • customer service tel: 08545 300 9799 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk
Random function
1. Press [ P ] when "CLOCK" is shown on the display until
the "RND" symbol appears.
2. Press [ ON/OFF ] in order to start/stop the random function.
3. "RND" flashes to when the random function is active when
"CLOCK" is shown on the display.
Example:
The set time is 06:00 (on) and 18:00
dom function is activated, the power will be turned on approx.
16–24 minutes after 06:00 and is turned off approx. 24–42 minutes
before 18:00.

Other functions

Manual to/from operation
• Press once on the cover to turn on the power.
the display. If is also shown in the display, this means that
the pre-programmed setting will dictate when the power will
be shut off.
• Press once on the cover to turn on the power.
in the display. If is also shown in the display, this means
that the pre-programmed setting will dictate when the power
will be shut off.
Daylight Savings Time
• Press the up/down arrows simultaneously [ ▲ ] and [ ▼ ] in
order to transition to Daylight Savings Time when "CLOCK"
is shown on the display. The time and the programmed
setting are now synchronised to Daylight Savings Time.
"S" now shows on the display.
• Press the up/down arrows simultaneously [ ▲ ] and [ ▼ ]
in order to transition to standard time when "CLOCK" is
shown on the display. The time and the programmed
setting are now synchronised to standard time.
Reset
• Press [ R ] once in order to clear all programmed settings.
12/24 hour display
• When you have changed batteries or have pressed [ R ]
the 24 H will begin to flash, change to a 12 hour clock
display by pressing [ ▲ ] or press [ ▼ ] to return to a 24 hour
display. Confirm by pressing [ SET ].
Battery change
If the digits in the display disappear when the timer is removed
from the power point, the batteries need to be changed. Remove
the display according to Connection point 3 below. The battery
compartment is on the back of the display. Change the 2 batteries
to new ones of SR69 type.
Connection
(off). When the ran-
1. Programme in the desired ON/OFF times in the timer as
explained above.
2. Remove the fuse from the power point. Make sure there is
no power.
3. Disassemble the time switch: Loosen the screw (A) and
insert a screwdriver at (B) and carefully bend.
is shown in
is shown
A
Fig. 1.
Fig. 3.
4. Connect the cables to the time switch according to fig. 3.
5. Mount the time switch in the socket moulding, and tighten. (Fig 4)
6. Mount the inner cover plate (fig. 5) with the screws.
7. Fasten the external cover on inner cover plate.
8. Replace the fuse and test.

Specifications

Rated Voltage
Max load
Batteries
B
B
Fig. 2.
Fig. 4. Fig. 5.
230 V AC, 50 Hz
500 W or 3.15 A (resistive)
2 × 1.5 V (SR69, V371)