Husqvarna QCE8600W User Manual page 26

26 www.husqvarna-electrolux.se
Activating the programme
1. Activate the appliance.
2. Select the menu: Favourites.
3. Press
4. Select your favourite programme
name.
5. Press
10.2 Using the Child Lock
When the Child Lock is on, the appliance
cannot be activated accidentally.
1. Touch
2. Touch
until the display shows a message.
To deactivate the Child Lock function
repeat step 2.
10.3 Function Lock
This function prevents an accidental
change of the heating function. You can
activate it only when the appliance
operates.
1. Activate the appliance.
2. Set a heating function or setting.
3. Press
display shows: Function Lock.
4. Press
To deactivate the function, press
display shows a message. Press
and then
When you deactivate the
appliance, the function also
deactivates.
10.4 Set + Go
The function lets you set a heating
function (or a programme) and use it
later with one press of any symbol.
1. Activate the appliance.
2. Set a heating function.
3. Press
display shows: Duration.
4. Set the time.
5. Press
display shows: Set + Go.
6. Press
to confirm.
to confirm.
to activate the display.
and at the same time
again and again until the
to confirm.
to confirm.
again and again until the
again and again until the
to confirm.
Press any symbol (except for
the function: Set + Go. The set heating
function starts.
When the heating function ends, an
acoustic signal sounds.
• Function Lock is on when
• The menu: Basic Settings
10.5 Automatic Switch-off
For safety reasons the appliance turns off
automatically after some time if a heating
function operates and you do not
change any settings.
Temperature (°C)
30 - 115
120 - 195
200 - 230
The Automatic switch-off
does not work with the
functions: Light, Food
. The
Sensor, Duration, End Time.
again
10.6 Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance
is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the appliance is activated.
– if you touch a symbol during the
night brightness (apart from ON /
OFF), the display goes back to
the day brightness mode for the
next 10 seconds.
– if the appliance is deactivated and
you set the function: Minute
Minder. When the function ends,
the display goes back to the night
brightness.
the heating function
operates.
lets you activate and
deactivate the function:
Set + Go.
Switch-off time (h)
12.5
8.5
5.5
) to start