Husqvarna QCE8600W User Manual page 24

24 www.husqvarna-electrolux.se
The display shows the food sensor
symbol.
6. Press
seconds to set the food core
temperature.
7. Set a heating function and, if
necessary, the oven temperature.
8. To change the food core
temperature, press
When the dish is at the set temperature,
an acoustic signal sounds. The appliance
deactivates automatically.
9. Touch any symbol to stop the signal.
10. Remove the food sensor plug from
the socket and remove the dish from
the appliance.
WARNING!
There is a risk of burns as the
food sensor becomes hot.
Be careful when you unplug
it and remove it from the
food.
9.2 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
or in less than 5
.
Baking tray / Deep pan:
Push the baking tray / deep pan between
the guide bars of the shelf support.
Wire shelf and baking tray / deep pan
together:
Push the baking tray / deep pan between
the guide bars of the shelf support and
the wire shelf on the guide bars above.
Small indentation at the top
increase safety. The
indentations are also anti-tip
devices. The high rim
around the shelf prevents
cookware from slipping of
the shelf.
9.3 Telescopic runners -
inserting the accessories
With the telescopic runners you can put
in and remove the shelves more easily.