Setting the time
This is used to set the time on the unit's clock
and hold until
appears in the display.
3 Select the portion of the time display you
wish to set with 2/3.
Pressing 2/3 will select a portion of the clock
As you select portions of the clock display the
portion selected will blink.
4 Select the correct time with 5/∞.
Pressing 5 will increase the selected hour or
minute. Pressing ∞ will decrease the selected
hour or minute.
• To cancel time settings, press
• You can also cancel time settings by holding
until the unit turns off.
and hold until the unit turns
Setting the time display on or off
You can turn the time display on even when the
sources are off.
to select the time display.
Each press of
• The time display disappears temporarily when
you perform other operations, but the time indi-
cation is displayed again after 25 seconds.
turns time display on or