Playing Tracks In A Random Order; Repeating Play; Pausing Cd Playback - Pioneer DEH-1400 Operation Manual

Built-in CD player
4 To perform fast forward or reverse, press
and hold 2 or 3.
5 To skip back or forward to another track,
press 2 or 3.
Pressing 3 skips to the start of the next track.
Pressing 2 once skips to the start of the current
track. Pressing again will skip to the previous
track.
Notes
• The built-in CD player plays one, standard,
12-cm or 8-cm (single) CD at a time. Do not
use an adapter when playing 8-cm CDs.
• Do not insert anything other than a CD into
the CD loading slot.
• If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
CD EJECT
the disc for damage before inserting the disc
again.
• If the built-in CD player does not operate prop-
erly, an error message such as
displayed. Refer to Understanding built-in CD
player error messages on page 15.

Playing tracks in a random order

Random play lets you play back tracks on the
CD in a random order.
1 Press 4 to turn random play on.
appears in the display. Tracks will play in a
RDM
random order.
2 Press 4 to turn random play off.
Tracks will continue to play in order.
9 En
to eject the disc, and check
ERR 14

Repeating play

Repeat play lets you hear the same track over
again.
1 Press 5 to turn repeat play on.
appears in the display. The track presently
RPT
playing will play and then repeat.
2 Press 5 to turn repeat play off.
The track presently playing will continue to play
and then play the next track.
Note
• If you perform track search or fast
forward/reverse, repeat play is automatically
cancelled.

Pausing CD playback

Pause lets you temporarily stop playback of the
CD.
may be
1 Press 6 to turn pause on.
appears in the display. Play of the cur-
PAUSE
rent track pauses.
2 Press 6 to turn pause off.
Play will resume at the same point that you
turned pause on.