Maintenance; Notes For Cleaning; Replacing The Pure N Fresh Filter (Optional) - LG GS-L668PNL Owner's Manual

Table of Contents

Advertisement

MAINTENANCE

Notes for Cleaning

• When removing a shelf or drawer from inside
the appliance, remove all stored foods.
– Otherwise, injury may occur due to the
weight of stored foods.
• If cleaning the outside air vents of the appliance
by means of vacuuming, then the power cord
should be unplugged from the outlet to avoid
any static discharge that can damage the
electronics or cause an electric shock.
• Detach the shelves and drawers and clean them
with water, and then dry them sufficiently, before
replacing them.
• Regularly wipe the door gasket with a wet soft
towel.
• Door basket spills and stains should be cleaned
as they can compromise storage ability of the
basket and could even be damaged.
• After cleaning, check if the power cable is
damaged, warm or improperly plugged.
• Keep the air vents on the exterior of the
appliance clean.
– Blocked air vents can cause fire or appliance
damage.
• Waxing external painted metal surfaces helps
provide rust protection. Do not wax plastic parts.
Wax painted metal surfaces at least twice a year
using appliance wax (or auto paste wax). Apply
wax with a clean, soft cloth.
• For the appliance exterior, use a clean sponge
or soft cloth and a mild detergent in warm water.
Do not use abrasive or harsh cleaners. Dry
thoroughly with a soft cloth.
• Never clean the shelves or containers in the
dishwasher.
– The parts may become deformed due to the
heat.
• If the appliacne is equipped with an LED lamp,
do not remove lamp cover and LED lamp in any
attempt to repair or service it. Please, contact an
LG Electronics customer information centre.
Replacing the Pure N Fresh
Filter (Optional)
To maintain the performance of the Pure N Fresh
filter, if a message indicating the filter replacement
is displayed, replace the filter as soon as possible.
1
If Replace icon lights on the control panel,
replace the Pure N Fresh filter.
Hold and remove the Pure N Fresh filter
2
cover by rotating it counterclockwise.
Remove the filter inside the Pure N Fresh
3
filter cover and replace it with a new filter.
4
After replacing the filter, insert the Pure N
Fresh filter cover by rotating it clockwise.
To reset the filter replacement period, press
5
the Pure N Fresh button on the control panel
for more than three seconds. The Replace
icon on the control panel will turn off.
6
It will then operate after replacing the filter.
33

Advertisement

Table of Contents
loading

Table of Contents