Water Dispenser Tank (Non Plumbed Models Only) - LG GS-L668PNL Owner's Manual

Water Dispenser Tank (Non
plumbed models only)
The water tank holds the water in which is to be
dispensed or used by the automatic ice maker to
make ice. Do not fill this tank with any other liquid
other than water. Doing so can damage the water
dispensing system.
1
Remove the water dispenser tank by pulling
it out while holding the handle.
2
Open the cover or cap of the water dispenser
tank.
3
Fill with bottle filtered or clean filtered water
up to the reference line indicated inside the
water dispenser tank. (Total capacity: 4 ℓ)
4
After filling with water, close the cover or cap
of the water dispenser tank.
5
Refit the water dispenser tank in to the fridge
shelf.
CAUTION
• Children should not be allowed near the
dispenser tank. If the child drops the water
dispenser tank while it is completely filled with
water, injury may occur.Do not fill the water tank
with drinks other than water or fill with hot water.
• Do not apply excessive force or impact when
removing or assembling the water dispenser
tank. Doing so can cause appliance damage or
injury. Use both hands to remove and hold the
water tank. The tank can be broken if it falls on
to the floor.
NOTE
• Before using the water dispenser tank after
installing the appliance, it should be washed
before filling it with water.
• Check if the water dispenser tank has been
placed in to the appliance correctly. If it is not
assembled correctly, water may leak from the
tank into the appliance.
• If there is an insufficient amount of water in the
water dispenser tank, ice cube size and quantity
may be affected and may result in no ice being
made.
• If the water level is low, or there is no water in
the water dispenser tank, the cold water and
ice dispensing function of the dispenser cannot
be used. Check if there is water in the water
dispenser tank and then fill it if necessary.
25