Setting The Temperature - LG GS-L668PNL Owner's Manual

Notes for Use the Control Panel
• The control panel will turn on in any of the
following cases.
– When the power is turned on
– When a button is pressed
– When the appliance door (fridge
compartment, freezer compartment, Door in
Door) is opened
• The control panel will turn off automatically for
energy saving in any of the following cases.
– When one minute has passed after turning
on the power
– When no button operation is carried out for
20 seconds after a desired button is pressed
– When 20 seconds has passed after the
appliance door (fridge compartment, freezer
compartment, magic space) is opened and
closed
• If there is any finger or skin contact to the control
panel while cleaning it, the button function may
operate.

Setting the Temperature

This sets the fridge temperature or freezer
temperature.
• Press the Fridge button or Freezer button to
adjust the temperature.
• The initial temperature of the fridge is set to 3
°C, and the temperature can be adjusted from 1
°C to 7 °C.
• The initial temperature of the freezer is set to
- 18 °C, and the temperature can be adjusted
from -14°C to -24 °C.
• The actual inner temperature varies depending
on the food status, as the indicated setting
temperature is a target temperature, not the
actual temperature within the appliance.
NOTE
• Wait until two or three hours have passed after
connecting the appliance to the outlet before
storing food in the appliance.
• The appliance can automatically detect
problems during the operation.
• If a problem is detected, the appliance does not
operate and an error code is displayed even
when any button is pressed.
24
• When this occurs, do not turn off the power and
immediately contact an LG Electronics customer
information centre. If you turn off the power,
the repair technician from the LG Electronics
customer information centre. It may have
difficulty finding the problem.
Setting Express Freeze
The function can quickly freeze a large amount of
ice or frozen foods.
• When you press the Express Freeze button, the
Express Freeze icon lights on the control panel.
• The function is enabled and disabled in turn
each time you press the button.
• The Express Freeze function automatically
terminates after a specific period has passed.
Setting and Resetting Lock
This locks the buttons on the control panel.
• When you press the Lock button for three
seconds, the set/reset icon on the control panel
lights. The function is enabled and disabled in
turn each time you press the button.
• If you press a button other than Lock when the
child lock is set, the button will not function.
• When you press a button other than Lock when
the child lock is set, the set/reset icon on the
control panel will flash 3 times.
• To change a setting, first press the Lock button
for three seconds to disable the function.
Setting Pure N Fresh (Optional)
Bacteria and odor inside the appliance can
be minimized with the Pure N Fresh function.
However, the function is only effective for bacteria
floating in the appliance, not bacteria adsorbed
onto food.
Setting Light (Optional)
This sets the Light function of the dispenser.
• When you press the Light button, the Light
icon is illuminated on the control panel and the
function is set. The function is enabled and
disabled in turn each time you press the button.
• When lighting is set to the on position, the
dispenser lamp will remain on regardless if
water or ice is being dispensed.