Advertisement
2. CAUTION-To reduce the risk of injury; charge only 12-
volt wet-lead-acid, sealed-lead-acid, gel, and absorbed matt
batteries.
3. Do not let charger get wet.
4. To reduce the risk of damage to the plug and cord, pull the
plug only to disconnect the charger.
5. Extension cords should not be used.
6. Do not operate the charger with a damaged plug or cord.
7. Do not use the charger if it has been damaged in any way.
8. Do not disassemble charger.
9. To reduce the risk of electrical shock, always unplug the
charger from the outlet and the battery before cleaning or
attempting any maintenance.
Features
1. Totally Automatic Switch-Mode Battery Charger – Suitable
for Gel, Sealed & Wet Lead Acid Batteries.
2. 12 Volts, 1 Amp Constant Current – Equivalent to 2 Amp
Tapered Charger in Charging time.
3. Input - 115VAC (Range - 90VAC to 132VAC).
4. Automatic Cut-off and then True Float charging. Can be
left connected indefinitely without harming the battery.
5. De-sulfation of battery – Increases battery life.
6. Both UL and cUL (CSA) listed.
7. Meets FCC Class B. High level of electro-magnetic
interference filtering.
8. Suitable for off-board application. Optional on-board
inhibit can be provided.
9. Very small size and light weight.
10. Uses sophisticated electronic circuitry with microchips. All
present day computers use switch-mode technology.
Page 14
Advertisement
