How To Operate - Ginnys 742476 User Manual

1. When ready to cook, place the cooking pot inside the housing. This
cooker has a cut off switch which will not allow the appliance to heat
if the cooking pot is not inserted into the housing. (If the cooking pot is
removed during the cooking cycle and then put back, cooking will
continue as though it was not interrupted.)
2. Plug the cooker into an outlet. It will not turn on as long as the function
dial is in the OFF position.
3. Select the function you want. The blue light behind the function dial will
come on and the red light behind the adjustment dial will come on.
SLOW COOK:
a. As with any slow cooker, be careful not to over-fill the pot
(contents may boil over).
b. Place the food you wish to cook inside the pot and put the lid on
top.
c. Turn the function dial to either WARM, LOW, or HIGH, per recipe
instructions. The LED display will show "6:00" for WARM, "8:00"
for LOW, or "4:00" for HIGH.
d. Turn the adjustment dial to set the desired time. The time will
increase or decrease in 30 minute increments from 30 minutes to
12 hours. The timer will begin counting down after 3 seconds.
Note:
Cooking time and temperature can be adjusted at any time
while cooking. Press the time/oven temp button and turn the
adjustment dial to change.
e. When done, turn the function dial to OFF and unplug the cooker.
If you do not turn OFF the cooker, WARM setting will shut off
after the set time expires. LOW and HIGH setting will go to auto
warm (the LED display will show "On" and the light behind the
adjustment dial will turn green). Auto warm will shut off after 12
hours.

HOW TO OPERATE

Facebook.com/GinnysBrand 7