Charging The Battery Pack - Yale Real Living Look Door Viewer Installation Instructions Manual

Charging the Battery Pack

Plug the supplied USB micro cable into USB port on battery pack. A USB micro 5v charger with 1 AMP minimum
output is required for proper charging. LED will glow red when charging and turn green when charged.
Resetting Look Door Viewer
Using a small tool, like a paper clip, press the reset button and hold for 5 seconds to reset
the door viewer to factory defaults.
After resetting, the door viewer will be in WiFi direct mode and will need to be configured
through the app.
™ to Factory Default
10
AYRLDVINSTFUL_RevB
LED
USB
Port