Introduction; Manual Purpose And Contents; Target; How To Keep This Manual - KENT 9087112020 Instructions For Use Manual

ENGLISH

INTRODUCTION

NOTE
The numbers in brackets refer to the components shown in Machine Description chapter.

MANUAL PURPOSE AND CONTENTS

The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and
autonomous way. It contains information about technical data, operation, machine inactivity, maintenance, spare parts and safety
conditions.
Before carrying out any procedure on the machine, the operators and qualiied technicians must read this Manual carefully. Contact
an authorized KENT Service Center in case of doubts regarding the interpretation of the instructions and for any further information.

TARGET

This Manual is intended for operators and technicians qualiied to perform the machine maintenance.
The operators must not perform procedures reserved for qualiied technicians. KENT will not be answerable for damages coming
from the non-observance of this prohibition.

HOW TO KEEP THIS MANUAL

The Instructions for Use Manual must be kept near the machine, inside an adequate case, away from liquids and other substances
that can cause damage to it.

IDENTIFICATION DATA

The machine model and serial number are marked on the label and can be read from the outside (1).
The machine model year is shown after the Date Code on the serial plate (A09 means January 2009).
This information is useful when requiring machine spare parts. Use the following table to write down the machine identiication data
for any further reference.
MACHINE model ...............................................................................
MACHINE serial number ...................................................................

OTHER REFERENCE MANUALS

– Electronic Battery Charger Manual, which is to be considered as integral part of this Manual.
– Spare Parts List (supplied with the machine)
– Service Manual (that can be consulted at KENT Service Centers)

SPARE PARTS AND MAINTENANCE

All necessary operating, maintenance and repair procedures must be carried out by qualiied personnel or by KENT Service
Centers. Only original spare parts and accessories must be used.
Call KENT for service or to order spare parts and accessories, specifying the machine model and serial number.

CHANGES AND IMPROVEMENTS

KENT constantly improves its products and reserves the right to make changes and improvements at its discretion without being
obliged to apply such beneits to the machines previously sold.
Any change and/or addition of accessories must be approved and performed by KENT.

OPERATION CAPABILITIES

These scrubber-dryers are used to clean (scrubbing and drying) smooth and solid loors, in civil or industrial environment, under
safe operation conditions by a qualiied operator.
The scrubber-dryers cannot be used for moquette and carpet cleaning.

CONVENTIONS

Forward, backward, front, rear, left or right are intended with reference to the operator position, that is to say with the hands on the
handlebar (2).
2
INSTRUCTIONS FOR USE
909 6309 000(3)2009-11 Razor SV17