Advertisement
1. Trim setting
① Turn on the power in the GYRO OFF
-MODE or GYRO-MODE.
② Fly the plane in the GYRO OFF-MODE
o r G Y R O - M O D E a n d a d j u s t t h e
trimmers.
③ Land the plane and turn off the gyro
power.
④ Turn on the gyro power again in the
GYRO OFF-MODE or GYRO-MODE. This
memorizes the trim position at the
gyro.
2. Flight Gain setting
A d j u s t t h e g y r o g a i n s o t h a t h u n t i n g
(deflection of the aircraft in small increments)
does not occur in the control axis direction.
The gyro gain is different depending on
the area of the aircraft rudder (aileron/
elevator), air speed, and gyro used. Initially
try changing the gain in 5% steps. If hunting
is excessive, the aircraft may be damaged.
Hunting tends to stop when the airspeed is
lowered.
FLIGHT SETTING
25
Advertisement
