Advertisement
PRE-FLIGHT SETTING
① Set the aileron, elevator, and rudder
gyro gain trimmers to about 45̊.
② In the state in which the gyros are
operative, move the transmitter
sticks and check that each control
s u r f a c e m o v e s i n t h e p r o p e r
direction. If a control surface moves
in the opposite direction of stick
operation, set transmitter reverse.
③ Without any transmitter input, turn
the model on the aileron, elevator,
and rudder rotating axis direction
and check if each control surface
moves in the direction opposite
the rotating direction (direction
in which the plane returns). If the
direction of the steering angle
correction rudder is reversed,
change the trimmer to 45̊ of the
opposite side.
22
Advertisement
