Table of Contents
Advertisement
Disassembly
Removing the Rear Housing
G
G
30
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
The phone has no screws to hold it together. The housing is fastened with plastic
catches. These are delicate and should be parted using utmost care.
Rear Housing
Latch
Figure 10. Unlocking the Rear Housing Latches
1.
Remove the battery cover, battery, antenna, and light guide as described in
the procedures.
2.
Using the flat end of the disassembly tool, carefully pry each of the 4 front
housing latches inward to release the rear housing as shown in Figure 10.
3.
Use the disassembly tool to disconnect the flex cable from its socket as shown
in Figure 11.
August 20, 2003
Rear Housing
Latch
Rear Housing
Latch
V150
Rear Housing Latch
031732o
6809471A67-O
Advertisement
Table of Contents
Troubleshooting
